From: Alex Palisek To: All Thread: ADF fossil (1/9) Date: 05-May-97, 2:11am (Ref# 5306) Servus All! Did anyone try to use the ADF fossil driver with BGFAX? What about unlocking ADF? ciao Alex --- mail protected by ColtED 3.00.Alpha5+ * Origin: Type +++ ATH0 to continue... (2:310/69)
From: Rich Cooper To: Alex Palisek Thread: Re: ADF fossil (2/9) Date: 07-May-97, 9:38am (Ref# 5308) -=ð On 05 May 97 02:11:02, Alex Palisek wrote this to All ð=- AP> Did anyone try to use the ADF fossil driver with BGFAX? AP> What about unlocking ADF? Hi Alex! I have been using ADF (AnDan Fossil) for about 2 years now and have even registered it with the author. I also use BGFax and have registered it as well. I leave ADF locked at 57600 and use BGFax on my second dial-in node with InterMail 2.50ml. I use a newer USR 33.6k modem on this node and it all runs under Windows 95 "SR2". I only had one minor glitch when I updated the system to the newer Win95B and put the newer 33.6k modem in there. It was the /FCO:## of the command line. I used to have it set at 4 or 6 and had to bump it up to 10. B.J. was quick to drop me a reply right here in this echo so it made it VERY easy to fix. Thanks B.J.! <g> Take care Alex, Rich PS - I use an internet address of medic5@juno.com for these kinds of notes. Just in case I get spammed it is not on my local server. <g> --- Renegade + IM 2.50 * Origin: The Operating Room *Ladson,SC* (803)851-0391 (1:372/116)
From: Alex Palisek To: Rich Cooper Thread: ADF fossil (3/9) Date: 10-May-97, 4:14pm (Ref# 5314) Servus Rich! AP>> Did anyone try to use the ADF fossil driver with BGFAX? AP>> What about unlocking ADF? RC> I leave ADF locked at 57600 and use BGFax on my me too, using this command line: m:\fd\adf\adf COM2 2F8 3 57600 4096 4096 8 RC> second dial-in node with InterMail 2.50ml. I use FD 2.02 RC> I use a newer USR 33.6k modem V.everything, Canada model RC> on this node and it all runs under Windows 95 "SR2". DOS 6.2/ DesqView 2.70. RC> I only had one minor glitch when I updated the system to the newer RC> Win95B and put the newer 33.6k modem in there. It was the /FCO:## of RC> the command line. I used to have it set at 4 or 6 and had to bump it RC> up to 10. B.J. was quick to drop me a reply right here in this echo RC> so it made it VERY easy to fix. I tried 10 right now, but it doesn't work either :( My problem is this result in the log-file: =========================================== -------- 05-08-97 1.70 M:\FD\BGFAX\BGFAX.EXE /fco:4 M:\FD\bgfax\infax F2 Z 11:50:19 Port F2, Initial DTE 38400, Multitasker DesqView 2.70 11:50:19 AnDan Software FOSSIL Version 1.43 (Ext) 11:50:24 OK response timeout!!! 11:50:24 ->[AT+FDR] 11:50:24 Sending +FDR 11:50:24 f=[AT+FDR] 11:50:58 f={{}} [] 11:50:58 f=[CONNECT] 11:51:03 page [#1] size [2648] cps [591] lines [1] 11:51:03 WARNING: RTC not detected (0) 11:51:03 Extra Bytes; BOP=0, EOP=0 11:51:03 f=[+FPS:1,0,0,0,0] 11:51:03 Page transfer status [+FPS:1,0,0,0,0] <MCF> 11:51:04 f=[+FHS:A2] 11:51:04 call termination status code [A2] 11:51:04 Problematic fax reception (EOP) 11:51:04 Fax document incomplete 11:51:04 Fax saved [M:\FD\BGFAX\INFAX\FAX0006.FAX] 11:51:04 size [2676] pages [1] lines [1] elapsed time [00:45] 11:51:07 a=[OK] 11:51:08 ->[ATH0] 11:51:08 i=[ATH0] 11:51:08 i=[OK] 11:51:08 DTR Toggle 11:51:12 ->[AT+FCLASS=0] 11:51:12 i=[AT+FCLASS=0] 11:51:12 i=[OK] 11:51:12 ->[ATZ] 11:51:12 i=[ATZ] 11:51:13 i=[OK] 11:51:13 Shutdown If anyone could help me getting the FAX receive running, I would be very glad. All seems to be configured like in the BGFAX-doku. The FAX begins to be received, but the submission stops at the line "RTC not detected". I used BNU before ADF, i changed to the new fossil just to see if that makes any difference to BGFAX. But it does not :(( I don't know what to change anymore, but if you got a tip for me, please don't let me wait another second :) greetings from vienna, ciao Alex --- mail protected by ColtED 3.00.Alpha5+ * Origin: Smith & Wesson: The original point and click interface. (2:310/69)
From: B.J. Guillot To: Alex Palisek Thread: ADF fossil (4/9) Date: 20-May-97, 3:00pm (Ref# 5342) > My problem is this result in the log-file: > =========================================== > -------- 05-08-97 1.70 M:\FD\BGFAX\BGFAX.EXE /fco:4 M:\FD\bgfax\infax F2 Z > 11:50:19 Port F2, Initial DTE 38400, Multitasker DesqView 2.70 > 11:50:19 AnDan Software FOSSIL Version 1.43 (Ext) > 11:50:24 OK response timeout!!! If /FCO:10 and /FCO:4 didn't work, try using /FCO:0 or /FCO:2 Are you actually using DesqView? Regards, bgfax author
From: Alex Palisek To: B.J. Guillot Thread: ADF fossil (5/9) Date: 08-Jun-97, 4:44pm (Ref# 5406) Servus B.J.! >> My problem is this result in the log-file: >> =========================================== >> ------+- 05-08-97 1.70 M:\FD\BGFAX\BGFAX.EXE /fco:4 M:\FD\bgfax\infax F2 >> 11:50:19 Port F2, Initial DTE 38400, Multitasker DesqView 2.70 >> 11:50:19 AnDan Software FOSSIL Version 1.43 (Ext) >> 11:50:24 OK response timeout!!! BG> If /FCO:10 and /FCO:4 didn't work, try using /FCO:0 or /FCO:2 OK, I will try that next. Would it make sense to use tame in the DV tasks to gain speed, or would that make the system unstable? Anyohne here with DV expirience? BG> Are you actually using DesqView? Yes, I do (logfile-cut, second line). ciao Alex --- mail protected by ColtED 3.00.Alpha5+ * Origin: ROM wasn't built in a day. (2:310/69)
From: B.J. Guillot To: Alex Palisek Thread: ADF fossil (6/9) Date: 19-Jun-97, 1:44pm (Ref# 5421) > OK, I will try that next. > Would it make sense to use tame in the DV tasks to gain speed, or would > that make the system unstable? > Anyohne here with DV expirience? I believe BGFAX already releases time slices to DV, but it's been so long since I tested BGFAX under DV, I can't remember for sure anymore. Regards, bgfax author
From: Richard Town To: B.J. Guillot Thread: ADF fossil (7/9) Date: 24-Jun-97, 9:46am (Ref# 5466) -=> Quoting B.J. Guillot to Alex Palisek <=- BG> OK, I will try that next. > Would it make sense to use tame in the DV tasks to gain speed, or would > that make the system unstable? Anyohne here with DV expirience? BG> I believe BGFAX already releases time slices to DV, but it's been so BG> long since I tested BGFAX under DV, I can't remember for sure anymore. With a 486DX33, only 8Mb ram, twin nodes up, BGFax works fine in rear-end mode on an adaptive answer fax call rgdZ Richard --- FMail/386 1.02 * Origin: Another message via PackLink +44(0)1812972486 (2:254/235)
From: Alex Palisek To: Richard Town Thread: ADF fossil (8/9) Date: 01-Jul-97, 0:41am (Ref# 5485) Servus Richard! BG>> OK, I will try that next. >> Would it make sense to use tame in the DV tasks to gain speed, or would >> that make the system unstable? Anyohne here with DV expirience? BG>> I believe BGFAX already releases time slices to DV, but it's been so BG>> long since I tested BGFAX under DV, I can't remember for sure anymore. RT> With a 486DX33, only 8Mb ram, twin nodes up, BGFax works fine in RT> rear-end mode on an adaptive answer fax call So you are lucky. I am not able to get BGFAX running with a USR/Canada V.everything in the environment you describe. This is what the log says: -------- 06-21-97 1.70 M:\FD\BGFAX\BGFAX.EXE /fco:10 M:\FD\bgfax\infax F2 Z 17:23:13 Port F2, Initial DTE 38400, Multitasker DesqView 2.70 17:23:13 AnDan Software FOSSIL Version 1.43 (Ext) 17:23:25 OK response timeout!!! 17:23:25 ->[AT+FDR] 17:23:25 Sending +FDR 17:23:25 f=[AT+FDR] 17:23:59 f={{}} [] 17:23:59 f=[CONNECT] 17:24:03 page [#1] size [2648] cps [602] lines [1] 17:24:03 WARNING: RTC not detected (0) 17:24:03 Extra Bytes; BOP=0, EOP=0 17:24:03 f=[+FPS:1,0,0,0,0] 17:24:03 Page transfer status [+FPS:1,0,0,0,0] <MCF> 17:24:05 f=[+FHS:A2] 17:24:05 call termination status code [A2] 17:24:05 Problematic fax reception (EOP) 17:24:05 Fax document incomplete 17:24:05 Fax saved [M:\FD\BGFAX\INFAX\FAX0007.FAX] 17:24:05 size [2676] pages [1] lines [1] elapsed time [00:52] 17:24:07 a=[OK] 17:24:07 ->[ATH0] 17:24:07 i=[ATH0] 17:24:07 i=[OK] 17:24:07 DTR Toggle 17:24:10 ->[AT+FCLASS=0] 17:24:10 i=[AT+FCLASS=0] 17:24:10 i=[OK] 17:24:10 ->[ATZ] 17:24:10 i=[ATZ] 17:24:11 i=[OK] 17:24:11 Shutdown I would be happy to have my FAX running, but don't know what to do anymore. ciao Alex --- mail protected by ColtED 3.00.Alpha5+ * Origin: Origin of Life? Just check my refrigerator... (2:310/69)
From: B.J. Guillot To: Alex Palisek Thread: ADF fossil (9/9) Date: 18-Jul-97, 4:28pm (Ref# 5524) > So you are lucky. I am not able to get BGFAX running with a USR/Canada > V.everything in the environment you describe. > This is what the log says: > -------- 06-21-97 1.70 M:\FD\BGFAX\BGFAX.EXE /fco:10 M:\FD\bgfax\infax F2 Try adjusting the /FCO:nn parameter to different numbers, like, /FCO:8, or /FCO:4, or /FCO:2, or /FCO:0 Regards, bgfax author