-------------------------------------------------------------------------- Setup hints for using BGFAX with TAG 06-29-96 B.J. Guillot bgfax@blkbox.com FidoNet 1:106/400 http://www.blkbox.com/~bgfax/ -------------------------------------------------------------------------- Because TAG does not offer the ability to exit when it detects a fax response code from the modem, you must run BGFAX in /HOST mode. Thus, BGFAX will answer the phone rather than TAG. 1. From now on, to get your system ready to answer calls, start up your BBS by using the FBBS.BAT file included with BGFAX 2. Be sure all the BGFAX files are copied into the directory as specified by the BGFAX environment variable (A "SET BGFAX=C:\BGFAX" line must exist in either your AUTOEXEC.BAT or FBBS.BAT file). 3. Make sure your BGFAX.CNF file is configured to use the proper fax class that your modem supports (you may need to comment and uncomment some lines in the BGFAX.CNF file). 4. There is a specific line in BGFAX.CNF that must be uncommented for TAG compatibility mode (ec=MNP). You need to make a file called EXEBBS.BAT in the BGFAX directory. EXEBBS.BAT ~~~~~~~~~~ @echo off cd\bbs if %1==LOCAL goto local if %1==MNP goto mnp tag connectrate=%1 com=%2 afterusererrlvl=255 goto end :mnp tag connectrate=%1 com=%2 errorcorrecting afterusererrlvl=255 goto end :local tag local logon afterusererrlvl=255 goto end :end %bgfax%\fbbs The most frequent problem people have with this setup... Once people get every thing configured, a data call comes into BGFAX, it transfers control to TAG, but the user that called in sees only garbage characters on their screen. The problem is that you have BGFAX's DTE speed set to a speed different than that of what TAG is using. The port speeds in BGFAX and TAG **MUST BE LOCKED AT THE SAME SPEED** (BGFAX.CNF defaults to sp=57600, while TAG may default to a locked speed of 38400. You must change the speed in either BGFAX or TAG so that they are the same!) Regards, bgfax author