--------------------------------------------------------------------------
Setup hints for using BGFAX Front-end mode with EZYCOM BBS        02-23-94
Frank Conway                                              FAX 303-770-5245
FidoNet 1:104/670                                         BBS 303-770-5815
--------------------------------------------------------------------------

This document was prepared by Frank Conway with assistance from the author
B.J. Guillot.

Contained within the files you recieved with your copy of BGFAX will be 2
files specifically designed to work with EZYCOM BBS v1.02. This should work
with any upgrade versions of Ezycom as long as they do not change the basic
premise of the way Ezycom looks runs in rear-end mode (Or behind a front-end
application such as BGFAX).


The files mentioned are:

EZYFBBS.BAT - Batch file that calls BGFAX Front-end mode and loads certian
              TSR's needed for Ezycom

EZEXEBBS.BAT- The batch file DOBBS.BAT calls to run the BBS upon recipt of 
              a data call. (RENAME TO (EXEBBS.BAT))


These files are pre-set for use just a minor look thru to check and make sure
your paths and other minor things are correct. For some reason the REAR-END
operation of BGFAX would not work with my High Speed modems. Well the only 
way I could think of was to do it in front end mode. It worked... 

This is a valid way to use your phone line for both FAX and DATA as long as  
your not using any other Front-end Mailer such as FRONT DOOR. If you are  
then please refer to the Help files for the particular mailer you are using.
I am running multi-lines and utilize one for mail (FRONTDOOR) and the second
for DATA/FAX calls. This has proved to work out GREAT.

=============================================================================

FBBS.BAT
~~~~~~~~
@ECHO OFF
REM ** an example batch file for frontend mode operation for EZYCOM BBS ****

SET EZY=C:\EZY
SET TASK=2
SET BGFAX=C:\EZY\FAX

REM ** Replace with X00 command line if not using BNU *************
C:\BNU /T:2048 /R:2048 /P:2 /F

REM ****** Autoboot can be removed if not used ********************
C:\AUTOBOOT /DVT N2 /CLD

REM ****** Remove if using DOS Ansi.sys instead of DVANSI *********
C:\DV\DVANSI

:Start
C:
CD\EZY\FAX
BGFAX /HOST
if errorlevel 55 maint1.bat
if errorlevel 50 maint2.bat
if errorlevel 4 goto faxrcvd
if errorlevel 3 goto datacall
if errorlevel 2 goto datacall
if errorlevel 1 goto Start
goto end

:faxrcvd
REM *** Can put a PRINTFAX batch file here to print upon recieve ***
goto Start

:datacall
 CALL C:\EZY\FAX\DOBBS.BAT
goto Start

:end
exit

EXEBBS.BAT
~~~~~~~~~~
REM *** batch file for running EZYCOM BBS within BGFAX's front end mode ***
REM *** Any questions can be refered to Frank Conway @ Evil Ed's BBS    ***
REM *** 303-770-5815 or Fido Net # 1:104/670, Special thanks goes to the***
REM *** Author B.J. Guillot for answering all my stupid questions...    ***   

if %1 == LOCAL goto Local

cd\ezy
ezy -b%1 -e20 -N2
goto raerr

:local
cd\ezy
ezy -l -e20 -N2 
goto raerr

:afteruser
goto Exit

:raerr
if errorlevel 30 goto event
if errorlevel 20 goto Exit
if errorlevel 7 goto scanecho
if errorlevel 6 goto scanecho
if errorlevel 5 goto scanecho
if errorlevel 0 goto Exit
goto afterra

REM *************************** Games Doors **************************

REM *************************** Utility *********************************
:unpack
CD\EZY
EZYMAIL -TOSS -VERBOSE -N2
EZYNET -IMPORT -ECHOAREA -N2
EZYLINK
goto Exit

:Scanecho
REM cd\ezy
REM ezymail -scan
REM ezynet -export
goto Exit

:setuperr
echo setuperr
goto Exit

:modeminit
echo modem init fail
goto Exit

:fossil
echo fossil fail
goto Exit

:modemresp
echo no response
goto Exit

:fulldisk
echo disk full
goto Exit

:fdload
echo FD no load
goto Exit

:nofoss
echo no fossil
goto Exit

:internal
echo internal fd error
goto Exit

:external
echo external error
goto Exit
        
REM ****************************** Util Doors ************************


REM ******************************** EVENTS ************************

:Nightly
goto Exit

:Log
cd\ezy
delete ezy1.log
cd\fd\log
delete c:\fd\log\fd.log
goto Exit

:Weekly
goto Exit

:Monthly
goto Exit

REM **************************** Restart *****************************

:restart
c:
cd\ezy
ezy -r -g -e0 -N2
goto afterdoor

REM **************************** Afterdoor ****************************


:afterdoor
if errorlevel 30 goto event
if errorlevel 20 goto Exit
if errorlevel 7 goto scanecho
if errorlevel 6 goto scanecho
if errorlevel 5 goto scanecho
if errorlevel 0 goto Exit
if errorlevel 0 goto Exit
goto afterra

:Exit
return

=============================================================================
All my Best
Frank Conway
a.k.a. Evil Ed
1:104/670